Blog / Automotive Recalls & Repairs

2026 FORD BRONCO SPORT Recall: SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Diagram showing the front suspension system of a 2026 Bronco Sport with labeled components. (Representative image for illustration purposes only. Actual vehicle may vary based on trim and configuration.)

2026 Ford BRONCO SPORT Recall: SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Attention all owners of the adventurous 2026 Ford Bronco Sport in Junction City, Kansas, and the surrounding Geary County area. A critical safety recall has been issued regarding the front lower control arm ball joint assembly. This component is essential for maintaining precise steering, vehicle stability, and structural integrity under all driving conditions. At Valor Ford, we believe in prioritizing your safety above all else. This detailed guide is designed to provide you with comprehensive, transparent, and actionable information about this recall, how it impacts your daily drive, and how our certified service department will resolve the issue for you completely free of charge.

Our dealership has served the local community for years, providing trusted service, transparent advice, and dependable vehicles. We understand that hearing about a manufacturer safety recall on your vehicle can bring up immediate questions and concerns. Is it safe to drive? How long will the repair take? How do I get a replacement part? We are here to address every single concern. If you suspect your vehicle is involved, we encourage you to promptly Call us at (785) 238-5114 or use our convenient digital scheduling system to book your priority service appointment as soon as possible.

What is the 2026 Ford Bronco Sport lower ball joint recall?

To understand this recall, we have to look beneath the rugged exterior of your 2026 Bronco Sport. The front lower control arm is a key structural member of your independent front suspension system. It connects the wheel hub and steering knuckle to the vehicle's frame. At the outer end of this control arm sits the lower ball joint—a highly engineered spherical bearing that allows the front wheels to steer left and right while simultaneously pivotally moving up and down to absorb bumps, dips, and off-road obstacles.

The specific issue outlined in the NHTSA safety recall involves a manufacturing defect within the lower ball joint assembly itself. In affected 2026 Bronco Sport models, the ball joint housing or internal retaining rings may not meet Ford's rigorous structural specifications. Under high-load situations—such as hard braking, sudden steering maneuvers, or traversing rough Kansas dirt roads—the ball joint can experience excessive wear, mechanical deformation, or in extreme cases, complete separation from the front lower control arm.

If a front lower ball joint separates while the vehicle is in motion, the affected front wheel can pivot outward unpredictably. This sudden physical detachment can lead to a severe loss of steering control, an increased risk of a collision, and extensive secondary damage to the vehicle's axle shafts, braking lines, and fender well. The recall covers specific production ranges of the 2026 Ford Bronco Sport manufactured within a designated window.

Because safety is our primary objective, Ford is proactively replacing the entire affected front lower control arm assembly—including the integrated lower ball joint—on all designated vehicles. This ensures that the structural integrity of your vehicle's front suspension is fully restored to original factory standards, using updated, certified components designed to withstand the toughest driving environments.

What are the warning signs of a failing front lower ball joint?

While some suspension issues can develop silently, a failing or compromised lower ball joint often presents noticeable symptoms before a critical failure occurs. Drivers in Junction City and the wider Geary County area should remain highly vigilant and pay close attention to any changes in their vehicle's handling dynamics, ride comfort, or auditory profile. If you experience any of the following indicators, please bring your SUV to our certified mechanics immediately.

1. Unusual Clunking or Popping Noises

One of the most common early warning signs is a metallic clunking, rattling, or popping noise coming from the front suspension. This sound is typically most pronounced when driving over speed bumps, pulling into driveways, navigating potholes, or making sharp turns at slow speeds. As the internal tolerances of the ball joint degrade, the ball stud begins to rattle inside its housing, producing a distinct physical knock.

2. Steering Wheel Vibration & Wandering

A worn, loose, or damaged front lower ball joint introduces excessive play into your steering geometry. This play can manifest as a persistent vibration or shimmy felt directly through the steering wheel, particularly at highway speeds. You may also notice your Bronco Sport 'wandering' or drifting slightly to the left or right, requiring constant micro-corrections to maintain a straight path down the road.

3. Uneven or Accelerated Tire Wear

When a ball joint fails to hold the wheel alignment in its precise factory position, the tire contact patch changes dynamically. This results in rapid, uneven tire wear—often referred to as 'feathering' or 'cupping.' If you notice the inner or outer edges of your front tires wearing down significantly faster than the rest of the tread, it is a clear indicator of a critical wheel alignment or suspension component issue.

A close-up of an all-terrain tire on a vehicle parked inside an auto repair shop. (Representative image for illustration purposes only. Actual vehicle may vary based on trim and configuration.)

Will Ford pay for the ball joint repair under this safety recall?

Yes, absolutely. By federal law and Ford Motor Company policy, all safety recall repairs are 100% free of charge to the vehicle owner. This complete coverage includes all necessary genuine Ford replacement parts, professional diagnostic checks, specialized shop supplies, and the labor required for our factory-certified technicians to perform the repair. You will never receive a bill or be asked to pay a deductible for safety recall work performed at Valor Ford.

When you bring your 2026 Bronco Sport to our service bay, we do not just swap out the control arm. Our technicians conduct a thorough inspection of the surrounding suspension, steering, and braking components to ensure everything is structurally sound. Once the new front lower control arm and ball joint assembly are installed, we perform a professional wheel alignment. This critical step guarantees that your steering feels precise, your tires wear evenly, and your vehicle drives exactly as the engineers intended. To make sure we have your parts reserved, you can quickly Order Genuine Ford Parts or contact our service advisors directly to coordinate your appointment.

How the Kansas terrain impacts your front suspension performance

Living and driving in Central Kansas places unique demands on any vehicle's suspension system. Whether you are daily commuting along I-74, exploring the beautiful rolling Flint Hills, navigating the expansive agricultural landscapes of Dickinson County, or driving down the rugged gravel roads surrounding Junction City, your suspension is constantly at work. These diverse driving environments introduce substantial vibrational energy and physical impacts into your lower control arms.

A compromised front lower ball joint is particularly vulnerable to the heavy road dust, loose gravel, and deep potholes common to our local geography. Over time, fine limestone dust and moisture can penetrate damaged rubber dust boots, accelerating internal wear on an already structurally vulnerable joint. When a component has a manufacturing defect, these demanding environmental factors act as catalysts, significantly increasing the probability of a mechanical failure.

Close-up of a dirty off-road SUV tire kicked up dust on a gravel road, showing suspension details. (Representative image for illustration purposes only. Actual vehicle may vary based on trim and configuration.)

Does Valor Ford offer loaner vehicles while safety recall work is being performed?

We know your time is highly valuable, and having your primary vehicle in the shop can disrupt your work schedule, family commitments, and daily routines. To minimize this inconvenience, Valor Ford is proud to offer alternative transportation solutions for our safety recall customers. Depending on parts availability, service scheduling, and your personal preferences, we provide several convenient options to keep you moving.

For repairs that require your Bronco Sport to stay in our service bays for an extended duration, we offer a fleet of clean, modern loaner vehicles. Alternatively, our complimentary local shuttle service can drop you off at your home or workplace in Junction City and pick you back up when the service is complete. For the ultimate convenience, you can also Schedule Pickup and Delivery Service, allowing us to pick up your vehicle from your home or office, perform the recall service, and return it directly to you.

If you choose to wait for your vehicle at our dealership, we invite you to enjoy our comfortable guest lounge. We offer complimentary high-speed Wi-Fi, flat-screen televisions, comfortable seating, and a premium coffee and beverage station so you can stay productive or relax while our factory-trained technicians complete your vehicle's safety updates. Please speak with our service coordinators when scheduling to reserve your loaner vehicle or arrange a pickup time.

Are there other historical recalls on the Ford Bronco Sport?

Maintaining a complete and accurate safety history of your SUV is a vital part of responsible vehicle ownership. Over its production generations, the Ford Bronco Sport has been subject to a few other safety recalls and technical service bulletins (TSBs). Being aware of these historical campaigns allows you to ensure your vehicle has had all necessary warranty updates performed, protecting its resale value and your peace of mind.

Rear Brake Disc Fractures

In some early production model years of the Bronco Sport, a recall was issued regarding potential microscopic cracks in the rear brake discs. Under extreme stopping forces, these cracks could expand, leading to reduced braking efficiency. Authorized dealers resolved this by inspecting the rear braking system and replacing affected brake rotors with upgraded, reinforced materials.

Fuel Injector Integrity

Certain models equipped with the 1.5L EcoBoost engine experienced a recall involving potential cracking of a fuel injector. A cracked injector could allow fuel or fuel vapor to accumulate near hot engine surfaces, raising safety concerns. The fix involved installing a physical fuel drain tube and updating the engine control software to detect pressure drops.

Rearview Camera Software

A minor digital update was issued for select model years regarding the rearview camera displaying a blank or distorted image when shifting into reverse. This was quickly resolved via a simple electronic module software update performed by dealership technicians, restoring clear rearward visibility.

If you purchased your 2026 Bronco Sport used, or want to verify if any past campaigns remain open on your vehicle, our service team can run a comprehensive Oasis Report using your VIN. This report details the entire factory service, warranty, and recall history of your specific SUV. If you are ever looking to trade in or upgrade your ride, you can also complete a quick Trade In Evaluation online to see how these completed safety updates help maximize your vehicle's current market value.

Comparing trims: What is the price difference between the Outer Banks and Badlands trims?

When configuring a 2026 Ford Bronco Sport, buyers often find themselves choosing between two highly popular top-tier trims: the premium, street-focused Outer Banks and the rugged, off-road-optimized Badlands. While both trims share the same fundamental platform, their suspension architectures, powertrain configurations, and intended driving dynamics are notably different, which naturally reflects in their pricing and long-term durability profiles.

The Outer Banks trim typically starts at a lower price point and is designed for drivers who prioritize premium interior comfort, advanced technology, and refined daily driving on paved surfaces. It features a standard independent front suspension optimized for smooth highway cruising. On the other hand, the Badlands trim commands a price premium, reflecting its heavy-duty off-road upgrades, including a more powerful 2.0L EcoBoost engine, advanced twin-clutch 4x4 system, and unique off-road-tuned suspension with larger dampers and rugged lower control arms designed to absorb severe off-road impacts.

An orange Ford Bronco Sport parked on a rocky dirt trail in a rolling green hill landscape. (Representative image for illustration purposes only. Actual vehicle may vary based on trim and configuration.)

Feature / Specification

Outer Banks Trim

Badlands Trim

Engine Option

1.5L EcoBoost I3 (Standard)

2.0L EcoBoost I4 (Standard)

Suspension Setup

Standard Independent Suspension

Off-Road Tuned with Hydraulic Rebound Stops

4x4 System

Standard 4x4

Advanced Twin-Clutch 4x4 with Rear Locker

Ground Clearance

7.8 inches

8.8 inches (with optional off-road tires)

Terrain Management

5 G.O.A.T. Modes

7 G.O.A.T. Modes (adds Mud/Ruts & Rock Crawl)

Primary Focus

Premium Comfort & Fuel Efficiency

Extreme Trail Capability & Rugged Durability

Regardless of which trim package you drive, both utilize precision-engineered front lower control arm and ball joint assemblies that must meet strict safety standards. If you are interested in exploring the unique handling dynamics of these different suspension systems firsthand, we invite you to Shop New Ford Bronco Inventory or visit our showroom to speak with a vehicle specialist about personalizing your driving experience.

How to verify if your specific 2026 Bronco Sport is affected

Not every 2026 Ford Bronco Sport produced is affected by this front lower ball joint safety recall. The campaign is limited to vehicles manufactured within a specific production window when the supplier parts in question were utilized on the assembly line. To find out if your vehicle is included, you will need to locate your 17-character Vehicle Identification Number (VIN).

Your VIN can be found in a few convenient locations:
• On the driver's side dashboard, visible from the outside looking through the lower corner of the windshield.
• Printed on the safety certification label located on the driver's side door jamb or inner door pillar.
• Listed on your vehicle's state registration card, insurance policy documents, or original vehicle purchase invoice.

Once you have your 17-digit VIN, you can input it into the official Ford Recall Lookup Tool on our website, visit the NHTSA recall portal, or simply call our friendly service department. We will instantly verify your vehicle's status and let you know if any action is required. If you are considering purchasing a pre-owned vehicle or looking to check the credit details for a replacement vehicle, you can also Contact us for current financing options online to explore your options.

Schedule your certified Ford recall service in Junction City today

If you have concerns, for suspension symptoms to develop before taking action. Your safety on the road is our absolute priority, and our team at Valor Ford is fully equipped, trained, and ready to resolve this safety recall for you quickly and professionally. Our factory-certified technicians have the specialized tools, alignment machinery, and genuine OEM parts needed to restore your 2026 Ford Bronco Sport's front suspension to perfect working order.

We make scheduling your appointment as easy as possible. You can use our online portal to select a day and time that fits your schedule, choose our convenient pickup and delivery service, or call our service desk directly. We are proud to serve our neighbors in Junction City, Fort Riley, Manhattan, and across Central Kansas. Visit us at 1825 Goldenbelt Blvd, Junction City, KS 66441, or Get Directions to Valor Ford. Let us take care of your vehicle so you can continue exploring the open road with complete peace of mind.

Logo for Valor Automotive featuring a blue and silver shield with 'VA' and the company name with a red star.
Posted in:

Related Posts

A female mechanic inspects the undercarriage of a black Ford truck raised on a hydraulic lift in an auto shop. (Representative image for illustration purposes only. Actual vehicle may vary based on trim and configuration.)

2021 FORD F-150 Recall: STEERING:RACK AND PINION — What Valor Ford Customers Need to Know

2021 Ford F-150 Recall: STEERING:RACK AND PINION — What Valor Ford Customers Need to Know As a proud owner of a 2021 Ford F-150, you know your truck is built to handle the toughest jobs across Junction City, Kansas, and the surrounding Geary County area. Whether you are hauling equipment to a job site, towing a trailer for a summer weekend getaway, or simply navigating your daily commute, you rely on your truck's steering to be precise, responsive, and completely reliable. However, Ford Motor Company has identified a critical safety issue concerning the electronic power-assist steering (EPAS) rack and pinion assembly on certain 2021 F-150 models. At Valor Ford, we want to ensure you have all the facts, understand the potential safety risks, and know exactly how to get this resolved quickly and covered at no cost under the recall. A steering recall can sound alarming, but it is important to remember that safety campaigns are designed to protect you before an issue leads to an accident. The core of this steering rack and pinion recall involves a manufacturing defect where certain internal components within the steering gear assembly may have been built out of specification. Under specific driving conditions, this can lead to an unexpected increase in steering effort or, in more severe cases, a sudden lock or restriction in the steering wheel's range of motion. Because your safety on Kansas roads is our absolute highest priority, our team of factory-trained technicians here at Valor Ford is fully prepared to inspect, diagnose, and repair affected vehicles with genuine OEM parts. For our customers in Junction City, Fort Riley, and nearby Dickinson County, addressing this recall promptly is vital for maintaining the structural and mechanical integrity of your truck. Operating a vehicle with a compromised steering gear is highly dangerous, especially at highway speeds where sudden maneuvers require absolute control. By partnering with our certified Ford service department, you can gain immediate peace of mind. We are here to walk you through every step of the recall process, from verifying your vehicle's status to completing the precision repair work in our state-of-the-art facility. Read on for a comprehensive breakdown of the recall, its technical implications, and how you can protect your investment. If you suspect your truck is affected, you do not have to wait to seek assistance. You can easily Call us at (785) 238-5114 to speak directly with our service advisors, or keep reading to find out how to locate your vehicle identification number and verify your status online. Our team is dedicated to providing transparent, friendly, and expert service to keep your F-150 running safely for years to come. Which Specific 2021 F-150 Models Are Affected by the Steering Rack Recall? Not every 2021 Ford F-150 rolling off the assembly line is included in this safety campaign. The recall is highly targeted and applies to specific production windows, particular trim levels, and select chassis configurations. Ford's engineering teams traced the issue back to a specific batch of steering gear assemblies manufactured by an external supplier during a narrow timeframe in late 2020 and throughout 2021. Because of these precise manufacturing batches, trucks built at the Dearborn Truck Plant and the Kansas City Assembly Plant within those designated production dates are the primary focus of this campaign. The mechanical issue itself stems from the internal ball nut assembly within the steering rack. During the supplier's manufacturing process, some of these assemblies received structural components that were susceptible to premature wear or micro-cracking under heavy load. Over time, these micro-cracks can expand, leading to a structural failure of the steering gear teeth or the internal ball return system. When this occurs, the driver may experience a tight spot in the steering wheel or, in the worst-case scenario, the steering mechanism could bind completely, making it impossible to steer the truck without extreme physical effort. This steering rack recall spans across multiple trim configurations, including popular variants like the work-ready XL, the versatile XLT, the luxurious Lariat, and even some high-end King Ranch or Platinum models. Additionally, both two-wheel drive (2WD) and four-wheel drive (4WD) configurations are represented, depending on the exact steering rack model installed during assembly. Because the steering system differs slightly based on engine selection—such as the 3.5L EcoBoost, the 5.0L V8, or the 3.5L PowerBoost Full Hybrid—it is crucial to cross-reference your specific drivetrain with the official recall database rather than assuming your model is exempt. Because this involves a complex safety system, we strongly advise owners not to rely on guesswork. To help you identify if your vehicle is within the affected group, you can explore our comprehensive online research materials. To learn more about Ford's engineering specifications for this model year, you can Research Ford F-150 models and their technical updates directly on our website, or contact our service desk to verify your vehicle's specific build parameters. How Do I Check If My Specific F-150 VIN Is Included in This Recall? Checking whether your truck is part of this recall is a straightforward process that you can do from the comfort of your home in Junction City or Dickinson County. The single most accurate way to verify your F-150's recall status is by using its unique 17-digit Vehicle Identification Number (VIN). Your VIN acts like your truck's fingerprint, containing precise details about where it was built, its exact trim level, engine configuration, and manufacturing date. To find your VIN, look at the base of your driver's side windshield from the outside of the truck, or check the safety certification label located on the driver's side door B-pillar jamb. Once you have written down your 17-digit VIN, you have several reliable lookup options. You can visit the National Highway Traffic Safety Administration (NHTSA) recall portal or the official Ford Owner website and enter your VIN into their search tools. Alternatively, you can bypass the online search completely and let the certified team at Valor Ford do the heavy lifting for you. By contacting our service advisors directly, we can instantly pull up your vehicle's complete history, check for any open campaigns, and verify if the parts required for your specific steering rack replacement are currently in stock. If you discover that your 2021 F-150 has an active steering recall, do not delay. We make the booking process as smooth as possible for our local drivers. You can schedule a convenient appointment online using our dedicated portal, or coordinate with us to have your vehicle picked up and returned to your home or office. Schedule Pickup & Delivery Service What Are the Key Mechanical Specs of the 2021 Ford F-150 Steering System? The 2021 Ford F-150 features a highly advanced Electronic Power-Assist Steering (EPAS) system. Unlike older hydraulic steering pumps that continuously draw power from the engine, the EPAS system utilizes an electric motor to provide assist only when needed. This design significantly improves fuel efficiency and allows for dynamic steering tuning. Below is an overview of the technical specifications that define this sophisticated system: EPAS Technology The system features a rack-mounted electric motor that delivers variable assist based on vehicle speed. This provides lighter steering effort during low-speed parking maneuvers and a firmer, more stable feel at highway speeds across Geary County. Active Nibble Control Built-in software algorithms constantly monitor for minor vibrations or 'nibbles' caused by uneven road surfaces or tire imbalance. The steering gear automatically counters these forces to deliver a smooth, premium driving experience. Pull-Drift Compensation This advanced feature automatically detects consistent side-winds or heavily crowned roads that would normally cause a vehicle to drift. The system applies a subtle, continuous correction so the driver doesn't have to fight the steering wheel. Steering Parameter Technical Specification Driver Benefit System Type Rack-and-Pinion with Electric Power Assist (EPAS) Saves fuel by eliminating constant hydraulic drag on the engine. Turning Circle 41.2 to 47.8 feet (varies by wheelbase) Provides excellent maneuverability for a full-size light-duty truck. Steering Ratio 16.5:1 to 17.5:1 (ratio varies by trim) Ensures highly responsive and predictable handling on Kansas highways. Integration Support ADAS & Pro Trailer Backup Assist Co-Pilot360 Enables automated steering inputs for parking, towing, and lane keeping. Does the 2021 F-150 Have Lane-Keep Assist Integrated Into the Steering Rack? Yes, the 2021 Ford F-150's modern driver-assist technologies are deeply integrated with the electronic power-assist steering (EPAS) rack and pinion system. Safety features like Lane-Keep Assist, Lane-Centering, and the highly acclaimed Pro Trailer Backup Assist do not operate independently of your physical steering gear; instead, they rely on digital commands sent directly to the electric motor mounted on the steering rack. This allows the vehicle's computer to make microscopic steering adjustments on your behalf, helping you stay safely centered in your lane during long highway road trips. Because of this close relationship between software and mechanical hardware, any physical fault within the steering rack assembly can immediately disrupt your truck's advanced safety features. If the internal gear teeth or ball nut mechanism experiences binding or mechanical friction, the electronic steering motor will struggle to execute the precise commands sent by the Ford Co-Pilot360 system. This can trigger dashboard warning lights, disable driver-assist features, or even cause unexpected feedback through the steering wheel as the system attempts to overcome the physical resistance inside the gear. Ensuring your physical steering rack is in flawless condition is key to keeping these safety systems working exactly as Ford designed them. If you are experiencing warning messages on your driver display or feel the Lane-Keep Assist pulling abnormally, it could be related to this underlying mechanical steering issue. Our team can quickly diagnose both the physical components and the electronic control modules to guarantee complete system harmony. Does the Chevy Silverado Have Similar Steering Recalls to the F-150? When mechanical issues like a steering recall surface, it is natural for truck owners to wonder if these problems are unique to Ford or if they represent broader industry challenges. The reality is that steering gear campaigns are common across the light-duty truck segment. Major manufacturers, including General Motors with the Chevrolet Silverado and GMC Sierra, have issued similar steering-related recalls over recent model years. This is largely because light-duty trucks carry massive loads, tow heavy trailers, and operate in challenging off-road conditions, putting immense stress on their steering components. For instance, Chevrolet has faced past recalls involving sudden losses of electric power steering assist in the Silverado, often traced back to software bugs or electrical grounding issues. By comparing these industry campaigns, we can see that steering complexity is a challenge shared by all major automakers as they transition to fully electronic, software-defined steering systems. Ford's recall of the 2021 F-150 reflects its safety monitoring process and ensures that structural and mechanical improvements are addressed before issues affect drivers on the road. If you are currently driving a pre-owned truck or thinking about trading in your vehicle, we invite you to check out our extensive pre-owned selection. At Valor Ford, we ensure that every single vehicle in our inventory is thoroughly inspected and free of outstanding safety recalls before it ever hits our lot. You can confidently Browse Used Inventory online or evaluate your own truck's trade value today. Get Your Trade-In Evaluation How Long Does It Take for Valor Ford to Complete the Steering Rack Recall Repair? At Valor Ford, we understand that your F-150 is a vital part of your daily life, and having it in the shop can disrupt your schedule. That is why our service team is committed to completing recall repairs as efficiently as possible without ever compromising on safety or quality. The physical replacement of the steering rack and pinion assembly is a highly technical procedure that typically takes our certified technicians between two to four hours of dedicated labor time. However, we ask that customers plan for their vehicle to be at our Junction City facility for a half-day to allow for thorough post-repair diagnostics and quality-control testing. During the repair process, our master technicians will disconnect the battery, drain the necessary cooling or auxiliary lines if required by your truck's specific engine configuration, and carefully extract the affected steering gear. We then install a brand-new, factory-authorized OEM steering rack assembly. Because the steering system is electronic, we must also connect your vehicle to our advanced Ford diagnostic computers to program the new EPAS module, calibrate the steering wheel angle sensor, and update any related software to ensure flawless communication with your driver-assist technologies. To guarantee that the replacement parts meet Ford's strict engineering standards, we only use genuine OEM components directly from our parts warehouse. If you ever need additional replacement parts or custom accessories for your truck, you can easily Order Genuine Ford Parts through our website to maintain your vehicle's factory specifications. Do I Need an Alignment After Replacing the Steering Rack? The short answer is: yes, absolutely. Whenever the steering rack and pinion assembly is unbolted, removed, or replaced, the physical geometry of your front suspension is altered. Even the slightest microscopic variation in how the new steering rack sits on the subframe can throw off your truck's wheel alignment. To ensure your vehicle operates safely and efficiently after the recall repair, a complete wheel alignment is a non-negotiable step in the process. Here is why performing an alignment is so critical: Prevents Tire Wear An incorrect alignment will cause your front tires to scrub against the road, leading to rapid, uneven tire wear. Performing an alignment protects your investment in high-quality truck tires. Ensures Straight Tracking Without a precise alignment, your F-150 may pull or drift to one side, requiring constant steering correction. A proper alignment guarantees the truck tracks perfectly straight. Calibrates Sensors Our alignment process includes resetting the Steering Angle Sensor (SAS). This ensures that your truck's electronic stability control and lane-keep features have an accurate center baseline. Because the alignment is a necessary part of a successful steering rack replacement, it is covered under the recall campaign. You will not have to pay out of pocket for the replacement rack or the subsequent alignment. Our team uses state-of-the-art laser alignment racks to verify that your front toe, camber, and caster are set exactly to Ford's original factory specifications before handing you back the keys. Does a Recall History Hurt the Resale Value of a Used F-150? A common concern among truck owners is how a safety recall might affect their vehicle's history report, such as CARFAX or AutoCheck, and its ultimate resale or trade-in value. Many believe that having a recall listed on the vehicle record acts as a red flag to future buyers. However, the exact opposite is true. An open, uncompleted safety recall is indeed a negative mark on a vehicle's history, but a fully documented, completed recall actually demonstrates responsible vehicle ownership and proactive maintenance. When you bring your 2021 Ford F-150 to an authorized dealership like Valor Ford, we record the completed recall repair directly in Ford's national database. This information is subsequently shared with vehicle history reporting agencies. When a prospective buyer or appraiser pulls your truck's CARFAX report in the future, they will see that the steering rack recall was resolved by factory-certified technicians using genuine parts. This serves as proof that the truck has been maintained to the highest safety standards and that its most critical steering components are brand new. Completing recall work is one of the easiest ways to protect your truck's residual value. If you are curious about what your F-150 is worth in today's current market, we encourage you to get an instant appraisal. Use our quick online tool to receive a fair, competitive valuation for your vehicle. Get Your Trade-In Evaluation Navigating Recalls in Dickinson County: Drive with Confidence For truck owners living and working throughout Junction City, Geary County, and Dickinson County, local support makes all the difference when handling manufacturer recalls. We know that driving into a dealership for service can feel like a chore, which is why Valor Ford is dedicated to redefining the dealership experience. We don't view recalls as mere transactions; we view them as an opportunity to support and protect the hard-working members of our Kansas community. Our service department is staffed by local professionals who understand the unique driving demands of our region—from agricultural hauling to daily highway commuting. To ensure your recall experience is entirely stress-free, we offer a range of customer-first conveniences. If you cannot afford to take time out of your busy day, ask our team about our service pickup and delivery options. We can arrange to pick up your F-150 from your home or workplace, transport it safely to our service center, complete the entire steering rack replacement and alignment, and return it directly to you. This ensures your life keeps moving forward without interruption while our master technicians take care of your vehicle's safety needs. We invite you to experience the Valor Ford difference firsthand. Our facility is conveniently located and easy to access. If you need to stop by for an inspection, to check parts availability, or to discuss your truck's history with our advisors, you can quickly Get Directions to Valor Ford and visit our team in Junction City today. Schedule Your Recall 2021 Ford F-150 Recall Repair at Valor Ford Today Your safety, your family's safety, and the long-term reliability of your truck should never be left to chance. If you own a 2021 Ford F-150, taking action on this steering rack and pinion recall is the single best way to ensure your truck remains safe, capable, and responsive on every Kansas road. At Valor Ford, we are fully equipped with the factory parts, specialized tools, and certified expertise required to complete this critical service quickly, professionally, and entirely free of charge. If you have concerns about steering symptoms, Contact our friendly service department today to verify your vehicle's VIN and reserve your service appointment. You can schedule your appointment instantly using our online scheduling tool, or speak with our service team directly to coordinate your visit. Let us help you drive with confidence. Schedule Ford Service Today Call Service: (785) 238-5114

Grey Ford F-150 truck driving on a gravel dirt road through rolling hills at sunset. (Representative image for illustration purposes only. Actual vehicle may vary based on trim and configuration.)

Ford F-150 Special Offer Event at Valor Ford: Direct Savings & Financing Terms

Ford F-150 Special Offer Event at Valor Ford: Direct Savings & Financing Terms The summer sales event of the year has officially arrived in Junction City, KS! Valor Ford is proud to announce exclusive factory incentives, massive direct dealer discounts, and unbeatable low APR financing terms across our entire fleet of new Ford F-150 pickup trucks. Whether you need a dependable workhorse for the farm, a robust towing platform for equipment, or a feature-packed luxury truck for weekend family trips, there has never been a better time to upgrade your ride. For a limited time through August 31, 2026, take advantage of factory customer cash allowances, low promotional financing rates through Ford Credit, and enhanced trade-in valuations designed to put maximum money back in your pocket. Visit Valor Ford today at 1825 Goldenbelt Blvd in Junction City to explore our extensive F-150 inventory, compare package features, and take a personalized VIP test drive before these seasonal savings expire. View New Ford F-150 Sales Inventory How Much Can You Save on a New Ford F-150 During This Event? During the Ford F-150 Special Offer Event at Valor Ford, total customer savings combine national factory rebates, regional promotional bonus cash, and exclusive dealer discounts to deliver unmatched bottom-line value. Shoppers can choose between attractive low-APR financing packages or substantial direct cash back options. Whether you are interested in a classic Regular Cab, a versatile SuperCab, or a spacious SuperCrew, our pricing specialists will help you stack eligible incentives. Take a moment to Research Ford F-150 trim options to see how factory discounts apply across different cab configurations and bed lengths. F-150 Configuration Promotional Financing Customer Cash Allowance Estimated Total Savings Regular Cab (XL / XLT) Low APR Options Up to $1,500 Up to $3,500 SuperCab (XLT / STX) Low APR Options Up to $2,250 Up to $4,500 SuperCrew (Lariat / King Ranch) Low APR Options Up to $3,000 Up to $6,000 Which Ford F-150 Trims Are Included in the Junction City Sales Event? Work-Ready XL & XLT Engineered for maximum utility, durability, and daily efficiency. Standard SYNC 4 touchscreen technology, heavy-duty payload ratings, and Ford Co-Pilot360 suite make these models ideal for commercial work and everyday dependability across Kansas roads. Luxurious Lariat & King Ranch Experience premium leather seating, B&O Unleashed Sound Systems, heated and ventilated seats, and advanced highway towing assistance. Perfect for truck owners who demand high-end luxury without sacrificing full-size pickup performance. Off-Road Tremor & Raptor Conquer rugged terrain and off-road trails with specialized suspension setups, Fox Racing shocks, high-ground-clearance skid plates, and Trail Control systems. Available with special event upgrade packages at Valor Ford. Exclusive Military Bonus Cash & Savings for Fort Riley Service Members Valor Ford is proud to serve the men and women stationed at Fort Riley and surrounding military installations. During the F-150 Special Offer Event, active duty personnel, military retirees, veterans, and eligible family members can stack the Ford Military Recognition Bonus Cash directly on top of current sales event discounts. Our finance specialists understand military pay structures and offer expedited paperwork handling for active duty service members. Bring your military ID or DD-214 form to unlock these exclusive stacked savings on your new Ford F-150. Reserve Your F-150 Event Savings Voucher and Book a Test Drive High demand trim configurations and popular color choices are selling fast during this promotional window. Don't risk missing out on maximum event incentives. Reserve your personalized savings voucher online and lock in a priority VIP test drive appointment at Valor Ford today. Claim Your Event Savings Voucher Maximize Your Trade-In Value Towards a New Ford F-150 Pre-owned vehicle market values remain exceptionally high, and Valor Ford is offering aggressive trade-in bonuses throughout this event. By trading in your current car, truck, or SUV, you can substantially reduce your loan amount, lower your monthly payment, or cover your down payment entirely. Use our quick online tool for a complimentary Trade In Evaluation report in minutes, or bring your vehicle to our Junction City dealership for an instant top-dollar appraisal cash offer. F-150 Towing and Hauling Specs for Dickinson County Farms and Work Sites Farmers, contractors, and outdoor enthusiasts throughout Dickinson County and Geary County demand hard-working capabilities. The Ford F-150 features high-strength, military-grade aluminum-alloy body design paired with a fully boxed high-strength steel frame to handle severe payloads and heavy towing requirements. With innovative features like Pro Power Onboard mobile generator power outlets, Smart Hitch weight distribution sensors, and Pro Trailer Backup Assist, the F-150 turns tough jobs into manageable tasks. Engine Option Max Towing Capacity Max Payload Rating Pro Power Onboard 3.5L EcoBoost V6 Up to 13,500 lbs Up to 2,445 lbs 2.0 kW Available 5.0L Ti-VCT V8 Up to 13,000 lbs Up to 2,230 lbs 2.0 kW Available 3.5L PowerBoost Hybrid Up to 12,700 lbs Up to 2,120 lbs Up to 7.2 kW Standard/Avail. PowerBoost Hybrid vs. 3.5L EcoBoost vs. 5.0L V8 Engine Deal Comparison 3.5L PowerBoost Hybrid Delivers 430 horsepower and 570 lb-ft of torque. Combines gas efficiency with serious towing grunt and built-in electrical power for work tools or camping gear. 3.5L EcoBoost Twin-Turbo V6 Packs 400 horsepower and 500 lb-ft of torque. The go-to option for maximum towing rating and instant low-end torque pull for heavy trailering. 5.0L Ti-VCT V8 Classic V8 exhaust note producing 400 horsepower and 410 lb-ft of torque. Proven reliability with high payload capacity for traditional heavy haulers. Get Pre-Approved for Low APR Financing Online Before Visiting Valor Ford Save time at the dealership by starting your purchase from home. Complete our quick, encrypted application to Get Pre-Approved for Financing in minutes. Our finance specialists work with Ford Credit and multiple lending institutions to secure competitive interest rates and customized repayment terms for every budget. Start Online Finance Application Custom Accessories and Work-Ready Upgrades Available During the Sale Bed Protection & Covers Tough spray-in bedliners, folding hard tonneau covers, and bed cargo management systems bundleable directly into your new truck purchase package. Towing & Suspension Gear Heavy-duty trailer hitch receivers, integrated brake controllers, side step running boards, and enhanced off-road shock upgrades. Interior Protection All-weather floor liners, custom seat covers, and under-seat storage vaults. You can easily Order Genuine Ford Parts through our dealership catalog. What Checklist Documents Should You Bring to the F-150 Sales Event? To ensure a seamless, rapid delivery process on the day of your purchase, please bring the following key documents with you to Valor Ford: • Valid government-issued driver's license • Current auto insurance card • Recent pay stub or proof of income (or LES for active duty military) • Title and current registration for your trade-in vehicle If you plan to claim military discounts, remember your Military ID or DD-214 form. Having these items ready allows our team to finalize financing approvals and vehicle registration rapidly so you can drive home in your new F-150 without delay. Event Schedule, Location Hours, and Directions to Valor Ford in Junction City Valor Ford is conveniently located at 1825 Goldenbelt Blvd, Junction City, KS 66441. We are easily accessible from I-70, Fort Riley, Manhattan, and Abilene. Showroom Hours: Monday – Friday: 8:00 AM – 7:00 PM Saturday: 8:00 AM – 6:00 PM Sunday: Closed Have questions before your visit? Call us at (785) 238-5114 to speak with an F-150 specialist, or click here to Get Directions to Valor Ford directly on your mobile device. Claim Your Special Offer on a New Ford F-150 at Valor Ford Today The Ford F-150 Special Offer Event ends August 31, 2026. Don't wait until preferred trim levels, engine options, and color choices are claimed by someone else. Contact Valor Ford in Junction City now to secure maximum seasonal savings, competitive financing rates, and exceptional customer service. Claim Your F-150 Special Offer Now

2026 Ford Bronco Outer Banks

2026 Ford Bronco Outer Banks: Built for Kansas Roads and Beyond

2026 Ford Bronco Outer Banks: Built for Kansas Roads and Beyond The 2026 Ford Bronco Outer Banks is the right pick for military families, working professionals, and rural Kansas drivers who need genuine off-road capability without sacrificing daily comfort. The in-stock Avalanche Gray model at Valor Ford is equipped with the 2.3L EcoBoost four-cylinder producing 275 horsepower, a 10-speed automatic transmission, four-wheel drive, and the Sasquatch Package — all at an MSRP of $56,530. It returns 18 city / 22 highway MPG and seats five in leather-trimmed comfort. Shop New Ford Bronco Inventory How Well Does the 2026 Ford Bronco Outer Banks Serve Local Lifestyles? The 2026 Ford Bronco Outer Banks is purpose-built for exactly the kind of life Junction City and Fort Riley families actually live — balancing structured weekday routines with weekend freedom on Kansas's open terrain. This is not a crossover that merely looks rugged; it is engineered to back up that appearance with real-world versatility that matters when your week includes a school run, a base commute, and a Saturday trail drive through the Flint Hills. Military families stationed at Fort Riley often find themselves needing a vehicle that transitions seamlessly from on-base errands to off-road recreation. The Bronco Outer Banks does exactly that. Its part-time four-wheel drive system and Sasquatch Package upgrades make quick work of the rolling grasslands and gravel back roads that define this region's outdoor character, while the leather-trimmed interior keeps daily drives civilized and comfortable for the whole family. For farming households in Dickinson County, the Bronco's rugged build and cargo-ready layout translate directly to practical value — hauling gear to county fairs, navigating unpaved farm lanes, and loading up for hunting season all fall within this truck-inspired SUV's natural skill set. Shoppers who want to compare the Bronco's family-hauling credentials against a more traditional option can explore the 2026 Ford Explorer research page, while those with heavier towing or work-truck needs might find the 2026 Ford F-150 overview or the 2026 Ford F-250 guide equally useful for comparison. The Bronco Outer Banks sits in a distinct category of its own — a body-on-frame-inspired adventure SUV that doubles as a genuine family vehicle for the Kansas lifestyle. Rugged Looks Built for Trails and City Streets The Outer Banks trim sits at a compelling point in the Bronco lineup — it brings a more refined, coastal-influenced aesthetic to the Bronco's unmistakably tough silhouette. The boxy, upright body, flat hood, and round headlights are all deliberate design nods to the original Bronco's heritage, and they translate into a vehicle that looks at home whether it is parked outside a historic building in downtown Junction City or pointed toward a Flint Hills trailhead. The in-stock unit at Valor Ford wears Avalanche Gray, a neutral, sophisticated tone that reads as purposeful rather than flashy — a fitting choice for buyers who want presence without ostentation. Paired with the Black Appearance Package, the exterior takes on a sharper, more aggressive character: blacked-out trim elements create a high-contrast look against the gray body that stands out on both city streets and open prairie roads. Ride height, flared fenders, and the Sasquatch Package's upgraded wheel and tire combination give the Outer Banks a stance that signals capability before a single trail is attempted. The 18-inch Bright Machined Aluminum Wheels add a polished detail that keeps the truck from feeling purely utilitarian — a balance the Outer Banks trim is specifically designed to strike. Buyers who prefer to explore pre-owned options before committing to a new build can browse our pre-owned inventory to see what is currently available. For those ready to step into a new Outer Banks, the Avalanche Gray unit on the lot at Valor Ford is ready to drive today. Browse Used Inventory Powertrain That Handles Fort Riley Training Grounds and Prairie Roads Under the hood of the Valor Ford Outer Banks unit sits the 2.3L EcoBoost turbocharged four-cylinder engine — Ford's own marketing name for a powerplant that has earned a strong reputation for balancing output with efficiency in demanding applications. This engine produces 275 horsepower and pairs with a 10-speed automatic transmission to deliver smooth, confident power across a wide range of driving conditions. Specification Detail Engine EcoBoost 2.3L I-4, DOHC, Ti-VCT, intercooled turbo Horsepower 275 HP Transmission 10-Speed Automatic Drivetrain Four-Wheel Drive (Part-time 4WD) Fuel Type Regular Unleaded City MPG 18 Highway MPG 22 The part-time 4WD system is a key asset for this region. When the pavement gives way to gravel county roads, muddy river banks along the Kansas River, or the uneven terrain of the Flint Hills, engaging four-wheel drive transforms the Bronco from a capable daily driver into a confident trail machine. The Sasquatch Package further enhances this off-road readiness with hardware upgrades designed to handle terrain that would stop a standard crossover cold. Fuel economy of 18 city and 22 highway MPG is realistic for a vehicle of this capability and size. For Fort Riley personnel running daily base commutes or Junction City families managing multiple school and errand runs each week, that figure represents a reasonable trade-off for everything the Bronco brings to the table. Drivers who are weighing an upgrade from an older truck or SUV can start by getting a clear picture of what their current vehicle is worth using our trade-in evaluation tool — a straightforward first step before visiting the showroom. The 10-speed automatic deserves specific mention: it keeps the EcoBoost engine in its optimal power band whether you are accelerating onto a highway on-ramp or crawling through a technical off-road section at low speed. That range of capability in a single powertrain is exactly what makes the Bronco Outer Banks such a well-rounded choice for Kansas drivers. Trade In Evaluation Spacious Cabin for Military Families and Weekend Picnics Step inside the Outer Banks and the first thing that registers is that this is a truck-inspired interior done right. The leather and leatherette front seat upholstery — finished in a Venom Smoke Truffle and Black Seats combination — gives the cabin a polished feel that punches above the Bronco's adventure-ready exterior. It is the kind of interior that a military spouse can appreciate after a long day, and that holds up equally well when muddy boots climb in after a Flint Hills hike. The four-door body style provides genuine rear-seat access, making the Bronco Outer Banks a practical choice for families with children in car seats or teenagers who need legroom. The rear seat center 3-point seatbelt is a standard safety detail that matters for full five-passenger use, whether that is a school run or a weekend drive to the Kansas River for a family picnic. Storage and cargo capacity are practical considerations for buyers in this market. Farming families in Dickinson County who haul gear to local agricultural events, or military households that pack for weekend camping, will find the Bronco's cargo area functional and accessible. The upright body design maximizes interior volume relative to the vehicle's footprint, and the removable door and roof options — hallmarks of the Bronco platform — open up the cabin experience when Kansas weather cooperates. The 2 12V power outlets keep devices charged on longer drives, and the overall ergonomic layout keeps the driver oriented without distraction. For owners who want to personalize or protect the cabin over time, genuine Ford parts and accessories are available through Valor Ford to keep the interior in factory-quality condition. Air conditioning is standard, which matters during Kansas summers when temperatures climb and a loaded family vehicle needs to cool down quickly. The Outer Banks cabin is designed to be a comfortable home base for whatever the day brings. Order Genuine Ford Parts Smart Tech That Keeps Personnel Connected on and off Base The 2026 Bronco Outer Banks comes equipped with a technology package that meets the practical connectivity needs of military families and working professionals without overcomplicating the driving experience. The 7-speaker audio system delivers clear sound quality for daily commutes, long highway drives, and weekend trail runs alike — a meaningful upgrade over base-level setups. The Equipment Group 312A Mid Package included on the Valor Ford unit bundles a collection of technology and convenience upgrades that elevate the Outer Banks experience beyond the standard configuration. Retained accessory power keeps devices and accessories running after the ignition is off, a small but genuinely useful feature for anyone who regularly uses the vehicle as a mobile workspace or charging station. Smartphone integration is central to how Fort Riley personnel and Junction City residents stay connected during busy days. The Bronco's infotainment system supports the kind of hands-free connectivity that keeps a driver's attention on the road while staying in contact with family, work, and base communications. Navigation, media, and communication functions are accessible through the central display, reducing the need to reach for a phone while driving. The all-in-one remote fob consolidates key functions into a single, streamlined device — a practical convenience for busy households juggling multiple schedules. Accessory power management ensures that the vehicle's electrical system supports the modern driver's device-heavy lifestyle without unnecessary drain. For families who spend significant time in the vehicle — carpooling kids, running between base appointments, or covering ground across Dickinson County's rural roads — having reliable, intuitive technology reduces friction in daily life. The Bronco Outer Banks delivers these tools in a straightforward, driver-focused layout that does not require a learning curve to use effectively. Safety Built to Protect You on Kansas Plains and Stormy Days The 2026 Bronco Outer Banks arrives with a solid foundation of active and passive safety systems that are particularly relevant for Kansas driving conditions — where sudden weather changes, long open-road stretches, and occasional gravel surfaces all demand a vehicle that can respond predictably. Four-wheel antilock brakes (ABS) with a four-channel system are standard, providing controlled, stable stopping performance whether the road surface is dry pavement, wet grass, or loose gravel. This is not a minor detail in a region where unpaved roads are common and afternoon rain can change surface conditions without warning. The 4-wheel disc brake setup supports confident, even braking force distribution across all four corners of the vehicle. Passive safety is addressed through the Bronco's structural design and seatbelt system. The rear seat center 3-point seatbelt ensures that all five seating positions have proper restraint — a critical feature for families who regularly carry a full passenger load. The Bronco's body construction is engineered with occupant protection in mind, providing a robust safety cell around the cabin. The retained accessory power system, while primarily a convenience feature, also supports safety-adjacent functions by keeping vehicle systems accessible when needed after the engine is off. For military families who drive in all conditions — early morning base runs in fog, afternoon storms rolling across the plains, or evening returns from a Flint Hills trail — the Bronco's braking and stability systems provide a meaningful layer of protection. The part-time 4WD system also contributes to safety in low-traction situations, giving drivers the ability to engage additional grip when road conditions deteriorate. The Bronco Outer Banks is not just capable — it is designed to bring its occupants home safely, regardless of what Kansas weather or terrain puts in the way. Breaking Down 2026 Ford Bronco Outer Banks Pricing Buyers The Valor Ford Outer Banks unit carries an MSRP of $56,530, and that number reflects a well-equipped configuration — not a stripped base build. The included Sasquatch Package, Black Appearance Package, Equipment Group 312A Mid Package, and leather-trimmed interior represent significant added value over a base Outer Banks configuration, making this a strong starting point for buyers who want capability and comfort without spending time building out a custom order. Feature Detail MSRP $56,530 Exterior Color Avalanche Gray Interior Leather/Leatherette, Venom Smoke Truffle/Black Seats Key Packages Sasquatch Package, Black Appearance Package, Equipment Group 312A Mid Engine EcoBoost 2.3L I-4, 275 HP Transmission 10-Speed Automatic Drivetrain Part-time 4WD Fuel Economy 18 City / 22 Hwy MPG Condition New, 21 miles For military families operating on a structured household budget, understanding exactly what is included at this price point matters. The Sasquatch Package alone adds substantial off-road hardware that would otherwise require aftermarket investment — meaning buyers get trail-ready capability from the factory, not as an add-on expense down the road. Buyers who want to see the full current selection of new Bronco units at Valor Ford can browse our new Bronco inventory to compare available configurations and colors. For those ready to move forward, the first financial step is straightforward: getting pre-approved online takes just a few minutes and gives buyers a clear picture of their purchase position before stepping onto the lot. The Outer Banks trim occupies a premium position in the Bronco lineup, and the Valor Ford unit's equipment level justifies every dollar of its asking price. For Junction City and Fort Riley buyers who want a vehicle that handles the full range of Kansas life without compromise, this configuration delivers. Contact Us for Financing Information Warranty and Maintenance Insights for Long-Term Ownership Long-term ownership confidence matters especially for military families who may face PCS orders, deployment cycles, or other life changes that make reliability non-negotiable. Ford's factory warranty coverage provides a structured safety net for Bronco Outer Banks buyers, though specific coverage terms should be confirmed at the time of purchase since program details can vary. Generally speaking, Ford's new vehicle warranty program includes bumper-to-bumper coverage for the initial ownership period and powertrain coverage that extends beyond that — protecting the engine, transmission, and drivetrain components that are central to the Bronco's capability. For a vehicle equipped with the EcoBoost turbocharged engine and Sasquatch Package hardware, having that powertrain coverage in place is meaningful reassurance. Ford Roadside Assistance is included with new vehicle purchase, providing manufacturer-backed emergency support when a breakdown or flat tire occurs away from home. This is particularly relevant for Bronco owners who regularly venture onto unpaved terrain or rural roads where immediate help is not always nearby. Having factory-level roadside support — rather than relying on a third-party service — means technicians who understand the Bronco's specific systems are part of the response. Routine maintenance scheduling is a practical ownership consideration that is easy to overlook at purchase time but becomes important quickly. Staying current on oil changes, brake inspections, and drivetrain service keeps the Bronco performing at the level its engineering promises. Valor Ford's service team is equipped to handle all of this for Bronco owners, and scheduling Ford service is straightforward through the dealership's online system. For buyers who plan to use their Bronco hard — trail runs, farm roads, heavy cargo loads — maintaining the vehicle on schedule is the most cost-effective long-term ownership strategy. The Bronco is built to last, but it rewards owners who treat maintenance as part of the ownership experience, not an afterthought. Schedule Ford Service Today 2026 Ford Bronco Outer Banks Buyer Questions Answered for Kansas Drivers Q: What is the MSRP of the 2026 Ford Bronco Outer Banks at Valor Ford? The in-stock 2026 Ford Bronco Outer Banks at Valor Ford is priced at an MSRP of $56,530. That figure reflects a fully equipped unit in Avalanche Gray with the Sasquatch Package, Black Appearance Package, and Equipment Group 312A Mid Package all included. This is a new vehicle with 21 miles on the odometer, available now at 1825 Goldenbelt Blvd, Junction City, KS 66441. Buyers can stop by or (785) 238-5114 to confirm availability before making the drive. Q: Is the 2026 Bronco Outer Banks capable off-road, or is it mainly a street SUV? The Outer Banks is genuinely capable off-road, especially in the configuration on Valor Ford's lot. The Sasquatch Package adds hardware-level upgrades — including upgraded suspension and larger tires — that prepare the Bronco for the rolling Flint Hills terrain and gravel back roads common throughout this region. The part-time 4WD system with low-range capability handles technical off-road situations that would stop a standard crossover. This is a real trail vehicle, not a lifestyle prop. Q: What is the fuel economy on the 2026 Bronco Outer Banks? The EcoBoost 2.3L four-cylinder engine in the Outer Banks returns 18 MPG city and 22 MPG highway on regular unleaded fuel. For a four-wheel-drive SUV with 275 horsepower and genuine off-road hardware, those figures represent a practical balance between capability and efficiency. Buyers who run primarily highway miles between Junction City and surrounding areas will see economy closer to the higher end of that range. Q: What packages are included on the Valor Ford Outer Banks unit? The stock unit (VIN: 1FMEE8BH3TLB10631, Stock #26FT96) includes the Sasquatch Package, Black Appearance Package, and Equipment Group 312A Mid Package — three meaningful factory upgrades that add off-road hardware, visual distinction, and technology features respectively. These packages are built into the $56,530 MSRP, so buyers are not paying for a stripped vehicle and then adding options separately. Q: How do I get started purchasing the Bronco Outer Banks at Valor Ford? The simplest path is to visit Valor Ford at 1825 Goldenbelt Blvd in Junction City for a test drive, or give the team a call at (785) 238-5114 to ask about the current unit's availability and any applicable military purchase programs. Customers like Justin Grabouski have noted that the team "made everything easy and straightforward" — and that experience starts from the first contact, not just at signing. © 2026 Valor Ford. All rights reserved.